Welcome, Guest
Username: Password: Remember me

TOPIC: mms gets only yellow

mms gets only yellow 23 Mar 2017 19:26 #55214

  • krishafi
  • krishafi's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 33
  • Thank you received: 4
Greeting from Poland !
i've been researching mms information on the web for some time. i've purchased a book MMS mineral panaceum by dr Antje Oswald which is available in my country and decided to try it out. i've ordered over the internet Sodium Chlorite 25% solution , citric acid 99% powder and some distilled water. i've made 50% citric acid by adding distilled water 1:1. i've poured 5 drops of mms to clear glass and than 5 drops of citric acid. the smell was noticeable, however the mixture only turned yellow ( not gold brown) . activation should last between 40-60 seconds . i've attached the labels of items i've ordered.
what does it mean ? is my mms "to weak" ,activator not strong enough ?
thank You in advance
Attachments:
The following user(s) said Thank You: Heero Yuy Parallax

Please Log in or Create an account to join the conversation.

mms gets only yellow 23 Mar 2017 23:49 #55217

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 2147
  • Thank you received: 1974
Activate in a small glass (do not add any water) and tilt the glass so the solution pools into a small area. Then look through that area and you should see dark amber color. Here are two photos I took. The test tube shows 4 drops MMS and the syringe 3 drops.



Attachments:
The following user(s) said Thank You: krishafi, Heero Yuy Parallax, Vigilence

Please Log in or Create an account to join the conversation.

2 ml of 3000 ppm original CDS equals a 1 drop MMS1 dose in a normal stomach
www.mmsinfo.org/infosheets/mms1_equates_to_cdh_and_cds.pdf
Websites: MMSinfo.org * www.facebook.com/groups/ebolacures/
YouTube Instructional Videos: www.youtube.com/channel/UCXv6hCnvjMmGg4_AYq4wlNw
Answers to many questions are in Jim Humble's books: jhbooks.org/
How to use CDS, CDH in Protocols: www.mmsinfo.org/infosheets/CDS_CDH_and_Protocols-2.pdf
Last Edit: by CLO2.

mms gets only yellow 23 Mar 2017 23:58 #55218

  • krishafi
  • krishafi's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 33
  • Thank you received: 4
That's exactly what I did. And "my yellow " seem not to be as vibrant as the activated mms I've seen in numerous videos on yt . Judging by the labels, are the ingredients I purchased "legit" ? Is it possible that the activator was to weak or poor quality ? Maybe it should be left to sit for some time after mixing the powder with distilled water ?
The following user(s) said Thank You: Heero Yuy Parallax

Please Log in or Create an account to join the conversation.

Last Edit: by krishafi.

mms gets only yellow 24 Mar 2017 03:11 #55223

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 2147
  • Thank you received: 1974
If you have some CLO2 test strips, you could measure the CLO2 ppm. I would make a batch of CDH according to this YT video and see what you get plus check the color after ~12 hours. If you don't have 4% HCL then use your 50% citric acid. The CLO2 ppm should be about 3500.
The following user(s) said Thank You: krishafi, Heero Yuy Parallax

Please Log in or Create an account to join the conversation.

2 ml of 3000 ppm original CDS equals a 1 drop MMS1 dose in a normal stomach
www.mmsinfo.org/infosheets/mms1_equates_to_cdh_and_cds.pdf
Websites: MMSinfo.org * www.facebook.com/groups/ebolacures/
YouTube Instructional Videos: www.youtube.com/channel/UCXv6hCnvjMmGg4_AYq4wlNw
Answers to many questions are in Jim Humble's books: jhbooks.org/
How to use CDS, CDH in Protocols: www.mmsinfo.org/infosheets/CDS_CDH_and_Protocols-2.pdf

mms gets only yellow 24 Mar 2017 19:21 #55228

  • krishafi
  • krishafi's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 33
  • Thank you received: 4
it seems that i made an unnecessary fuss. i mixed 4 mms drops with 4 drops of activator in one shoot glass and another with 10 drops mms and 10 drops activator and everything seems to be OK - the color is exactly the same as on the photos you provided, - yesterdays mixture was made from 3 drops, maybe the amount was so small that the color was as not prominent as the solution was spread. i searched for the CLO2 test stripes you mentioned - they are very expensive hear 150 PLN (~40$). (I've purchased NaCl2 25% solution for 14PLN (~3$) for an 0,5 Liter bottle) . the mms came in plastic containers- should i pour to glass bottles for better storage ? how long can i store it before loosing its potential ?

Please Log in or Create an account to join the conversation.

mms gets only yellow 25 Mar 2017 00:24 #55230

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 2147
  • Thank you received: 1974
Test strips can be pricey if you don't live in the States. A few years ago I lived in Ireland and if I could find what I was looking for, it was usually expensive even before V.A.T.!

I would transfer the SC to glass bottles as I have experienced HDPE plastic bottle failures after about one year. I have heard SC should keep for 5 years or so. That price you paid was a good deal!

Attachments:
The following user(s) said Thank You: krishafi, Heero Yuy Parallax

Please Log in or Create an account to join the conversation.

2 ml of 3000 ppm original CDS equals a 1 drop MMS1 dose in a normal stomach
www.mmsinfo.org/infosheets/mms1_equates_to_cdh_and_cds.pdf
Websites: MMSinfo.org * www.facebook.com/groups/ebolacures/
YouTube Instructional Videos: www.youtube.com/channel/UCXv6hCnvjMmGg4_AYq4wlNw
Answers to many questions are in Jim Humble's books: jhbooks.org/
How to use CDS, CDH in Protocols: www.mmsinfo.org/infosheets/CDS_CDH_and_Protocols-2.pdf

mms gets only yellow 25 Mar 2017 19:40 #55236

  • krishafi
  • krishafi's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 33
  • Thank you received: 4
well i didn't want to start a new topic . just have a quick question ,
I've made a solution for topically use. 100ml spray bottle ; 10 drops of mms +10 drops citric acid 50% for every 30 ml of water. i've been using it for 2 days spraying my face every hour or so (i've got a mild case of seborrhea around my nose), and today it started to sting a little bit. what i've w learn from the book is when a solution stings you - you should diluted it , but for 2 days the ratio seem to have been ok. even the redness seem to have faded slightly. should i continue spraying with this solution ? what maybe the cause of the sudden skin irritation. the solution should be good for 4 days. does the activator i'm using right now can have something to do with the stinging ?
The following user(s) said Thank You: Heero Yuy Parallax

Please Log in or Create an account to join the conversation.

mms gets only yellow 25 Mar 2017 20:37 #55239

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 2147
  • Thank you received: 1974
Skin irritation could be caused by the citric acid activator or more likely the residual MMS (unactivated sodium chlorite) in MMS1.

For skin use, I normally would use CDS which is just CLO2 gas in distilled water. The next best option would be CDH which has much less residual MMS compared to MMS1. You can easily make a batch of CDH following my YT video instructions and see if that works better for you.
The following user(s) said Thank You: krishafi, Heero Yuy Parallax

Please Log in or Create an account to join the conversation.

2 ml of 3000 ppm original CDS equals a 1 drop MMS1 dose in a normal stomach
www.mmsinfo.org/infosheets/mms1_equates_to_cdh_and_cds.pdf
Websites: MMSinfo.org * www.facebook.com/groups/ebolacures/
YouTube Instructional Videos: www.youtube.com/channel/UCXv6hCnvjMmGg4_AYq4wlNw
Answers to many questions are in Jim Humble's books: jhbooks.org/
How to use CDS, CDH in Protocols: www.mmsinfo.org/infosheets/CDS_CDH_and_Protocols-2.pdf

mms gets only yellow 25 Mar 2017 21:52 #55242

  • krishafi
  • krishafi's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 33
  • Thank you received: 4
i came across THIS method of making CDS . however as i understand CDS exists in water below 11*C so is it possible for me to capture the gas in the syringe , than inject it o a spray bottle with cold distilled water and quickly close the cap ? do i have to store such prepared spray in the fridge in order to make it effective (will the gas escape from the water into the empty space in the bottle ? and what about the remaining "amber liquid" in the syringe. does it have any oxidizing / beneficial properties ? or is it just waste ? is CDS stronger then MMS (as no gas escapes vs open glass an 40second activation)
The following user(s) said Thank You: Heero Yuy Parallax

Please Log in or Create an account to join the conversation.

Public Petition for Sua Sponte Call for Rehearing En Banc

(Change.org)

Thank you!

www.StandByDaniel.com

Who is Daniel Smith?

Go to top